앰플 충전 생산 라인
앰플 충전 생산 라인에는 수직형 초음파 세척기, RSM 멸균 건조기, AGF 충전 및 밀봉기가 있습니다. 세척 구역, 멸균 구역, 충전 및 밀봉 구역으로 나뉩니다. 이 컴팩트한 라인은 독립적으로 작동할 뿐만 아니라 함께 작동할 수도 있습니다. 다른 제조업체에 비해 전체 크기가 작고, 자동화 및 안정성이 높으며, 고장률과 유지보수 비용이 낮다는 등의 고유한 특징을 가지고 있습니다.
GMP 규정 준수 및 국제 인증 획득
EU GMP, 미국 FDA 및 WHO 표준을 완벽하게 준수하여 전 세계적으로 원활한 승인을 받을 수 있습니다.
통합 턴키 기능
설계부터 납품까지 완벽한 솔루션을 제공하여 즉시 운영이 가능하도록 합니다.
믿을 수 있는 성능 및 안정성
내구성이 뛰어난 시스템으로 안정적인 생산량과 가동 중단 시간 단축을 보장합니다.
이 제품을 공유하세요
간략한 소개
The Ampoule SVP Injectable Liquid Filling Production Line includes Ultrasonic washing machine, Sterilizing tunnel, Ampoule filling and sealing machine. It’s divided into washing zone, sterilizing zone, filling and sealing zone. This compact line can work together as well as independently. Compared with other manufacturers, our equipment has unique features, including overall dimension smaller, higher automation & stability, lower fault rate and maintenance cost, and etc.
제품 장점
- The compact line realizes single linkage, continuous operation from washing, sterilizing,filling and sealing. The whole production process realizes cleaning operation; protects products from contamination, meets the GMP production standard.
- This line adopts water and compressed air cross pressure jet wash and ultrasonic wash at inverted state. The cleaning effect is very good.
- The ultra filtration technology is applied at the washing machine’s filter. The clean and sterile washing water and compressed air is obtained through terminal filter, which can improve the clarity of the washed bottle.
- Bottle in feed auger and star wheel meet, the auger space is small. Ampoule can walk straight. Ampoule can transfer more stable and can hardly broken.
- The stainless manipulators are one side fix. The location is more accuracy. The manipulators are wear proof. When changing of pitch the manipulators no need stretch out and turn. The turning bearing wont contaminating the cleaning water.
- The ampoule are sterilized by the hot air laminar flow sterilization principle. The heat distribution is more even. The ampoule are under the HDC high temperature sterilization condition, which meets the standard of GMP.
- This equipment adopts negative pressure sealing principle to seal the high efficiency filter which are used for purify the tunnel. The filter is easy to install which can ensure the one hundred purification condition.
- The equipment adopts hinge type seat heat and horizontal hot air fan structure. The maintenance of the equipment is more convenient and laborsaving.
- This equipment adopts chain conveying belt with flank. The conveying belt won’t be off track, anti-creeper, no bottle falling.
- The equipment adopts advance technology such as mufti-needle filling, front and rear nitrogen charging and wire drawing sealing, which can meet the standard of different type of products.
- The fill-seal machine adopts balcony structure. The star wheel in feed and convey bottles continuously, the running of the equipment is stable and less bottle breakage.
- This equipment is universal. It can’t be used to 1-20ml ampoule. Changing parts are convenient. In the meantime, the equipment can be used as vial washing, filling and capping compact line by changing some mould and out feed wheel.
제품 영상
애플리케이션
유리 앰플 생산용.
생산 절차
초음파 세척
이 제품은 외벽에는 2단계 물 분사와 2단계 공기 분사를, 내벽에는 3단계 물 분사와 4단계 공기 분사를 적용한 세척 기술을 채택했습니다.
6개의 분사 바늘 그룹은 트랙 세척 기능을 갖추고 있으며, 분사 바늘 전체는 316L 스테인리스강으로 제작되었습니다. 서보 제어 시스템과 가이드 슬리브 및 가이드 보드가 분사 바늘에 정확한 위치를 제공하여 위치 불일치로 인한 바늘 손상을 효과적으로 방지합니다.
WFI와 압축 공기의 사용이 간헐적이므로 소비량을 줄일 수 있습니다.
표준 세척 과정:
- 병 스프레이
- 초음파 예비 세척
- 재활용수: 실내 세탁, 실외 세탁
- 압축 공기: 내부 송풍
- 재활용수: 실내 세탁, 실외 세탁
- 압축 공기: 내부 송풍
- WFI: 내부 세탁
- 압축 공기: 내부 송풍, 외부 송풍
- 압축 공기: 내부 송풍, 외부 송풍
살균 및 건조
The washed bottles enter into sterilizing & drying machine slowly uniformly through mesh belt. Pass through preheating zone, high temperature sterilizing zone, cooling zone gradually.
습기 배출 팬이 병 내부의 증기를 외부의 고온 영역으로 배출하고, 병은 300~320℃의 온도에서 약 5분간 살균됩니다. 냉각 영역에서 살균된 바이알을 냉각시켜 최종적으로 기술적 요구 조건을 충족합니다.
건조 및 살균 공정 전체는 실시간 모니터링 하에 진행됩니다.
충전 및 밀봉
이 기계는 발코니 구조를 갖춘 단계별 변속 시스템을 채택하고 있습니다.
기계가 전체 생산 공정을 자동으로 완료합니다.
Auger conveying — Front nitrogen charging (optional) — Solution filling — Rear nitrogen charging (optional) — Preheating — Sealing — Counting — Finished products outputting.
기계 구성
기술적 매개변수















