アンプル充填生産ライン

アンプル充填生産ラインには、縦型超音波洗浄機、RSM殺菌乾燥機、AGF充填密封機が含まれます。それは洗浄の地帯、殺菌の地帯、詰物およびシーリング地帯に分けられます。この密集したラインは一緒に、また独自に働くことができます。他のメーカーと比較して、私たちの機器は、全体的な寸法が小さく、高い自動化&安定性、低故障率とメンテナンスコストなど、ユニークな特徴を持っています。.

GMP準拠および世界的に認証済み

EU GMP、米国FDA、WHOの基準に完全に準拠しており、スムーズなグローバル承認を実現します。.

統合型ターンキー機能

設計から納品まで、運用準備が整ったエンドツーエンドのソリューションを提供します。.

信頼性の高い性能と安定性

耐久性に優れたシステムにより、安定した出力とダウンタイムの削減を実現します。.

簡単な紹介

The Ampoule SVP Injectable Liquid Filling Production Line includes Ultrasonic washing machine, Sterilizing tunnel, Ampoule filling and sealing machine. It’s divided into washing zone, sterilizing zone, filling and sealing zone. This compact line can work together as well as independently. Compared with other manufacturers, our equipment has unique features, including overall dimension smaller, higher automation & stability, lower fault rate and maintenance cost, and etc.

製品の利点

  1. The compact line realizes single linkage, continuous operation from washing, sterilizing,filling and sealing. The whole production process realizes cleaning operation; protects products from contamination, meets the GMP production standard.
  2. This line adopts water and compressed air cross pressure jet wash and ultrasonic wash at inverted state. The cleaning effect is very good.
  3. The ultra filtration technology is applied at the washing machine’s filter. The clean and sterile washing water and compressed air is obtained through terminal filter, which can improve the clarity of the washed bottle.
  4. Bottle in feed auger and star wheel meet, the auger space is small. Ampoule can walk straight. Ampoule can transfer more stable and can hardly broken.
  5. The stainless manipulators are one side fix. The location is more accuracy. The manipulators are wear proof. When changing of pitch the manipulators no need stretch out and turn. The turning bearing wont contaminating the cleaning water.
  6. The ampoule are sterilized by the hot air laminar flow sterilization principle. The heat distribution is more even. The ampoule are under the HDC high temperature sterilization condition, which meets the standard of GMP.
  7. This equipment adopts negative pressure sealing principle to seal the high efficiency filter which are used for purify the tunnel. The filter is easy to install which can ensure the one hundred purification condition.
  8. The equipment adopts hinge type seat heat and horizontal hot air fan structure. The maintenance of the equipment is more convenient and laborsaving.
  9. This equipment adopts chain conveying belt with flank. The conveying belt won’t be off track, anti-creeper, no bottle falling.
  10. The equipment adopts advance technology such as mufti-needle filling, front and rear nitrogen charging and wire drawing sealing, which can meet the standard of different type of products.
  11. The fill-seal machine adopts balcony structure. The star wheel in feed and convey bottles continuously, the running of the equipment is stable and less bottle breakage.
  12. This equipment is universal. It can’t be used to 1-20ml ampoule. Changing parts are convenient. In the meantime, the equipment can be used as vial washing, filling and capping compact line by changing some mould and out feed wheel.

製品ビデオ

応用

ガラスアンプル製造用。.

アンプル充填生産ライン

製造手順

超音波洗浄

外壁には水2層と空気2層、内壁には水3層と空気4層の洗浄技術を採用しています。.

6組の噴霧ニードルはトラック洗浄機能を備え、噴霧ニードルは316Lステンレス鋼を全面に採用しています。サーボ制御システムとガイドスリーブ、ガイドボードにより、噴霧ニードルの正確な位置決めが可能となり、位置ずれによるニードルの損傷を効果的に防止します。.

注射用水と圧縮空気は断続的に供給されるため、消費量を削減してください。.

標準洗濯工程:

  • ボトルスプレー
  • 超音波による前洗浄
  • 再生水:室内洗濯、屋外洗濯
  • 圧縮空気:内部吹き込み
  • 再生水:室内洗濯、屋外洗濯
  • 圧縮空気:内部吹き込み
  • WFI:内部洗浄
  • 圧縮空気:室内送風、室外送風
  • 圧縮空気:室内送風、室外送風
アンプル充填生産ライン

滅菌・乾燥

The washed bottles enter into sterilizing & drying machine slowly uniformly through mesh belt. Pass through preheating zone, high temperature sterilizing zone, cooling zone gradually.

除湿ファンがボトル内の蒸気を屋外に排出し、高温ゾーンではボトルが300~320℃で約5分間殺菌されます。冷却ゾーンでは殺菌されたバイアルが冷却され、最終的に技術要件を満たします。.

乾燥および滅菌プロセス全体は、リアルタイム監視下で実施されます。.

アンプル充填生産ライン

充填・密封

この機械は、バルコニー構造を備えたステップバイステップの伝動システムを採用しています。.

機械は生産工程全体を自動的に完了します。

Auger conveying — Front nitrogen charging (optional) — Solution filling — Rear nitrogen charging (optional) — Preheating — Sealing — Counting — Finished products outputting.

アンプル充填生産ライン

マシン構成

アンプル充填生産ライン

技術パラメータ

適用仕様 GB2637規格に適合する1~20mlのB型アンプル。.
最大容量 7,000~10,000個/時
注射用水消費量 0.2~0.3MPa、1.0m³/h
圧縮空気消費量 0.4MPa 50m³/h
電気容量 CLQ114 Vertical ultrasonic washing machine: 15.7KW
RSM620/60 滅菌乾燥機 46kW、加熱出力:38kW
AGF12 アンプル充填・密封機 2.6kW
寸法 CLQ114 Vertical ultrasonic washing machine: 2500×2500×1300mm
RSM620/60 Sterilizing and drying machine: 4280×1650×2400mm
AGF12 Ampoule filling and sealing machine: 3700×1700×1380 mm
重さ CLQ114 Vertical ultrasonic washing machine: 2600 Kg
RSM620/60 Sterilizing and drying machine: 4200 Kg
AGF12 Ampoule filling and sealing machine: 2600 Kg
Note: As products are constantly updated, please contact us for latest specifications.

製品カテゴリー
今すぐお問い合わせください

関連製品