Blood Collection Needle Assembly Production Line

GMP-Compliant & Globally Certified

Fully compliant with EU GMP, US FDA, and WHO standards for smooth global approval.

Integrated Turnkey Capability

End-to-end solutions from design to delivery, ready for operation.

Reliable Performance & Stability

Durable systems ensuring stable output and reduced downtime.

Introduction

The blood collection needle assembly machine is used for pen-type blood collection needle product assembly. It is fully automatic. Easy & safe operation with individual PLC & HMI control, only 3-4 workers are needed to run the whole line well. Compared with other manufacturers, our blood collection needle assembly machine has a smaller overall dimension, more stable and intelligent running, lower fault rate and maintenance cost, etc.

Application

For pen-type blood collection needle production.

Blood Collection Needle Application

Production Procedures

Production Procedures

Working Station Description

Needle holder feeding

Handle the needle holder by the vibrator, then enter the slide way and put it on the tooling strip.

Needle holder feeding

Needle loading

Loading the needle on the needle thimble method, the needle is lifted up to the needle seat by scraping the needle seat mold and then it is dropped to the needle seat, after loading the needle, turn the direction and enter the gluing station. Here equip with detection for needle.

Needle loading

Gluing

Gluing is driven by a Japanese Panasonic servo motor, and two linear guides are added to drive the glue tray to dispense glue. The glue tray box adopts German Lenuz to automatically detect whether the glue tray box has glue or not, and if there is no glue machine stops automatically, and the alarm is displayed on the touch screen.

Gluing

Drying

The drying tunnel is to dry the glue, the drying box is heated by glass tube stainless steel heating wire, with the current display gauge, the temperature controller controls the temperature to reach the degree. Enter the image detection after drying out.

Drying

Detection of pinhole clogging

To check whether the needle is blocked or not. It is a method of blowing air. It is judged whether the needle is blocked by air or not. The sensor detects one-to-one and is equipped with a barometer. When the air pressure is not up to standard, it will automatically shrink and remove the plugged needle from the main line. Turn direction at the next station.

Detection of pinhole clogging

Detection of needle burrs

Here station can equip with CCD detection for needle burrs. When unqualified products are detected, they will be removed from the shaving area, and then enter the leak detection. (The needle tip height tolerance is within 0.3, and the burr of 0.05 * 0.05 can be detected)

Detection of needle burrs

Waste removal

Rejecting waste station is a comprehensive waste product removal by CCD imaging and leak detection.

Long-needle protecting cover Loading

It adopts the slide way to load needle protecting cover, the material is stainless steel 304, Autonics detection device, whether there is a sheath and then transfers to the slide way for stirring, the front row of the sheath only has cylinders one to one, electromagnetic The valve is individually controlled. After the sheath is tested, whether the needle is missing, the sheath is not removed if the needle is missing, so as to ensure the waste of the cover and the qualified rate of the.

Long-needle protecting cover Loading

Cover pressing

Under the pressing protection cover, there is a position to center the protection cover to ensure that the needle penetrates the cover. After being pressed, it will be sent out into the finished product blanking.

Cover pressing

Needle reversal

Rotary needle are uniformly clamped and translated by a manipulator, and then rotated 180 degrees after siliconization, and added to a fixture.

Needle reversal

Soft protecting cover loading

The rubber cover adopts a slide way. The rubber cover passes quickly and falls into the slideway. The sheath falls on the needle tip through the processed parts. The front row of the sheath is controlled one to one. If there is a shortage of products, the sheath will not be installed. Ensure the waste of the sheath and the pass rate of the upper sheath.

Soft protecting cover loading

Soft Cover pressing

The rubber cover clamps the rubber sleeve uniformly and presses it down, pressing the rubber cover down.

Soft Cover pressing

Short-needle protecting cover Loading

It adopts the slide way also, the material is stainless steel 304, and Autonics sensor detection. Whether there is a jacket and then transfer it to the slideway for stirring. The front row of the jacket only has cylinders one to one. The solenoid valve is individually controlled. After the cover is tested, whether the needle is missing, the cover is not removed if the needle is missing, to ensure the waste of the cover and the pass rate of the cover loading.

Short-needle protecting cover Loading

Short-needle cover pressing

The cover clamps the short needle cover uniformly and presses it down, pressing the cover down.

Short-needle cover pressing

Finished product

After the finished product outputting, turn to the feeding needle seat station, and the whole cycle is completed.

Finished product

IVEN Blood Collection Needle Assembly Machine Advantages

  • High Capacity: 12000pcs/hour.
  • High Automation: Reasonable operation process and optimization of integration, 3-4 skilled operators can manage the whole production line smoothly from beginning loading to finished needles outputting.
  • Process Detection: The whole line process detection devices all use top level brands such as Germany Leuze, OMRON, to control the feeding and running stations, ensuring high qualification rate.
  • Intelligent & Humanized Operation System: Humanized design for each station, PLC + HMI control.
  • Servo Motor Control: Uses servo motor control for key parts moving, controlling precision and moving smoothly.
  • Intelligent Alarms: Equipped with alarm devices for failures, material jams, low air pressure, and lack of silicone oil, alerting operators via the HMI.
  • Top Brand Components: Key parts and electrical units use top brands to ensure long-term stability and durability.
  • High Quality Structure: Main body adopts high quality steel for weight bearing; surface and product-contact parts adopt high quality stainless steel for easier cleaning, meeting GMP standards.
  • Customization Support: Accepts customization with CCD visual inspection systems.

Machine Configuration

Machine Configuration

Tech Parameters

Parameter Value
Applicable Needle Pen type
Working Speed 10000-12000pcs/hour
CCD detection accuracy for needle glitch 0.05*0.05 (based on tip height tolerance is within 0.3)
Power 380V/50HZ, 18KW
Compressed Air Clean Compressed Air Pressure 0.6-0.8Mpa
Compressed Air consumption 70 m³/h
Space Occupation 6080*11200*1800 mm (L*W*H)
Note As products are constantly updated, please contact us for latest specifications.

Related Products